Professional Steel Grating Treads Sizes

services; fabrication; fabricating; marco fabProfessional Steel Grating Treads Sizes

Professional Steel Grating Treads Sizes

Steel grating stair treads are available fabricated to any size in type “W” welded, type “DT” dovetail pressure locked or type “SL” swage locked construction. Treads are manufactured with a defined visible nosing and pre-punched end carrier plates or angles, ready for bolting to the stair stringers.

Choose these stair treads for greater durability than metal plank grating stair treads. They have an open surface that prevents debris from accumulating. Nosing is textured for traction. Powder-coated steel treads are for use in dry, noncorrosive areas. Galvanized steel treads are more corrosion resistant than painted steel.;Stainless steel grating stair treads are available fabricated to any size in type “WS” welded, type type “SLS” swage locked, or type “DTS” dovetail pressure locked grating. Carrier plates are recommended for use with 19, 15, and 11 spaced gratings, while steel carrier angles are recommended for use with 8 and 7 spaced gratings.;Bar Grating Stair Tread, Smooth, Tread Width 36 in, Tread Depth 10 15/16 in, Height 1 1/4 in, Material Carbon Steel, Bearing Bar Spacing 1.188 in, Bearing Bar Thickness 0.188 in, Number of Bearing Bars 9;OnGrip nosing welded to grating and . carrier plates/angles. Slip-resistant tread nosings are available with standard 1-1/4" width. Optional 2" wide nosings are available for applications subject to California Title 24 and the California Building Code (must be specified at time of order). STEEL CARRIER ANGLES Recommended for use with 8 and 7 ;You can refer to the product page of stair tread steel grating to know more bout the gratings. Here, we will introduce the project design of steel grating used in the stair treads applications. Length of steel grating stair treads. Common length. 700 mm, 800 mm and 900 mm are the most widely used and popular width. Maximum length is 1200 mm.;McNICHOLS ® Standard-Duty Welded Bar Grating Stair Treads consist of rectangular-shaped bearing bars (smooth or serrated), Carrier Plates and Nosing. Available in Carbon Steel, Powder Coated Carbon Steel, Galvanized Steel and Stainless Steel, Welded Treads come in many heights, thicknesses and spacings and are available directly from inventory.

Bar Grating Stair Treads | Brown

Bar Grating Stair Treads | Brown

1-1/4" x 3/16" 19W4 Smooth Carbon Steel Welded with Checker Plate Nosing Galvanized Bar Grating Stair Treads View Select Size 10.938" x 30" 10.938" x 36" 12.125" x 36";Plank grating stair treads are available in Grip Strut, Perf-O Grip, Traction Tread and Grate-Lock™. Available in multiple depths and lengths, plank grating stair treads are an excellent choice for applications that require non-slip surfaces, as well as light weight product features.;Bar Grating Stair Tread, Smooth, Tread Width 36 in, Tread Depth 10 15/16 in, Height 1 1/4 in, Material Carbon Steel, Bearing Bar Spacing 1.188 in, Bearing Bar Thickness 0.188 in, Number of Bearing Bars 9;OnGrip nosing welded to grating and . carrier plates/angles. Slip-resistant tread nosings are available with standard 1-1/4" width. Optional 2" wide nosings are available for applications subject to California Title 24 and the California Building Code (must be specified at time of order). STEEL CARRIER ANGLES Recommended for use with 8 and 7 ;BAR GRATING. Stair Treads. STANDARD TREAD WIDTHS AND END PLATE DIMENSIONS *Table of widths based on 3/16" thick bearing bars and standard bar spacing 1-3/16" cc (1-1/8" face-to-face for riveted grating.) SUGGESTED BEARING BAR SIZES* *Maximum tread length based on 400-lb. concentrated load on nosing and 4 bearing bars at center of tread length ;/For serrated grating, the depth of grating required for a specied load is 1/4” greater than in the chart. U= Uniform load, Psf C= Concentrated load at (mid-span), LB per foot of grating width In order to obtain the permissible loading capacity for each type of grating, multiply its assigned value times the value on the table. 22W4 Y 22W2 0.85;When tread length exceeds 5’-6”, design tread for 300 lb concentrated loads at 1/3 points. Maximum tread length based on 300 lb concentrated load on front 5 in of tread at center of tread length and deflection limitation of 1/240 of length. END PLATE DIMENSIONS Grating Depth “B” dimension “C” dimension up to 1-1/4” 1-3/4” 2-1/2”

Steel Grating | McMaster

Steel Grating | McMaster

Use plank grating for platforms, stair treads, ramps, and decks. Walkway Plank Grating An integral toeboard keeps tools and parts from falling off this plank grating and meets OSHA requirement 1910. 23 for elevated walkways.;1-1/4" x 3/16" 19W4 Smooth Carbon Steel Welded with Checker Plate Nosing Galvanized Bar Grating Stair Treads View Select Size 10.938" x 30" 10.938" x 36" 12.125" x 36";Steel Grating Standard Sizes We stock and supply standard sizes in galvanized back and F.R.P. but can also custom-make to suit your specific requirements. Our stock sizes are as follows: 450 × 50 × 20;through the grating. Dimensions conform to the requirement that states that a ball of Ø 15 mm must be prevented from falling through the grating. Choice of the following materials: - steel quality S235Jr, bearing bar thickness of 2 to 5 mm - Stainless Steel 1.4301 (V2A) - Stainless Steel 1.4571 (V4A) SP grating treads;Additionally, perforated stair treads are more pleasant for walking with heel shoes, animals are also generally prefer perforations over meshed grating treads. Large stock. Gratingshop.com offers perforated stair treads in various standard sizes, in high quality hot dip galvanized steel!;carrier plates/angles. Slip-resistant tread nosings are available with standard 1-1/4" width. Optional 2" wide nosings are available for applications subject to California Title 24 and the California Building Code (must be specified at time of order).;• Type, bar size, and surface of grating • Type of nosing – checker plate is standard • Width of tread • Length of tread • Finish – unpainted, shop primer, or hot dip galvanized • Number of treads • Shipping and tagging instructions Example: Nucor Grating Tru-Weld bar grating treads, c/w 1 1/4” x 3/16” serrated grating

Stair Treads

Stair Treads

Steel grating stair treads are available fabricated to any size in type “W” welded, type “DT” dovetail pressure locked or type “SL” swage locked construction. Treads are manufactured with a defined visible nosing and pre-punched end carrier plates or angles, ready for bolting to the stair stringers.

Contact Us to Learn More About Your Perforated Metal Product Options

Feel free to contact Royce Specialty Steel to learn more about how our stock and custom perforated metal product offerings can benefit your industrial operation, and please let us know about any specific customization requirements or special requests. We’ll also be happy to provide a no-obligation quote and help with your ordering process. If you need assistance calculating the open area, contact one of our friendly representative and we’d be happy to assist you.

At Royce Specialty Steel, we’re all about three things: Quality, Speed and Reliability.